Pico Corporation Crimp Tools
- Aeroquip Kits and Tooling for Rynglok Fittings
- Aircraft Cable Swaging
- Amp Tyco TE Connectivity Hydraulic Crimp Tooling And Head Assemblies
- AN Fittings
- Aviation and Aircraft Instruments and Power Supplies
- Avionics Aircraft Electrical Supplies
- Backshells
- Backshell Adapters
- Banding Tools
- Breakers Circuit
- Burndy T & B Hydraulic Crimp Tools
- Calibration Gages, Pin Retention Tools and Aircraft Tooling
- Contact Pins and Sockets MIL Spec
-
Crimp Dies for Aircraft and Avionics
- Burndy Souriau M10S-1 Crimping Dies
- Crimp Dies for M22520/10-01 Tool frame
- Crimping Dies for M22520/5-01 Tool Frame
- Daniels DMC Dies
- ETC Molex Crimp Dies
- Kings KTH1000 Crimp Dies
- M8ND Burndy Crimp Dies
- M22520/23-01 Crimp Dies for Pico 400-B BHD AND B-1, Daniels WA23, Astro AMT23B
- M22910/7-01 612648 Crimp Dies
- Miscellaneous Die Sets
- Pico 500-D Series Dies
- Rennsteig Crimp Dies
- TE Connectivity AMP Crimping Dies
- TE Connectivity Amp Hydraulic Crimping Dies
- TE Connectivity Amp Tyco 543344-1 Crimping Dies
- TE Connectivity Amp Tyco 59500 Crimping Dies
- TE Connectivity Amp Tyco 69710 and 69710-1 Crimping Dies
- TE Connectivity AMP Tyco Pneumatic Crimping Dies
- T & B Crimp Dies for Hand and Hydraulic Tooling
- Thomas & Betts Crimping Dies
- U Crimp Dies for Burndy Tooling
-
Crimp Tools and Crimpers
- AMP Tyco TE Connectivity Crimping Tools
- Amp Tyco TE Connectivity Mass Termination Tooling Crimpers and Crimp Heads
- Astro Corporation/ Buchanan Crimp Tools
- Berg Dupont Crimp Tools
- Burndy Souriau FCI Crimping Tools
- Daniels Mfg Corp DMC Crimping Tools
- Electro-Term Hollingsworth Midland Ross Crimp Tools
- Hirose Crimp Tools
- ITT Cannon Crimp Tools
- JST Crimp Tools
- Kings Winchester Crimpers
- Miscellaneous Manufacturer Crimp Tools
- Molex ETC Crimp Tools
- Panduit Crimp Tools
- Pico Corporation Crimp Tools
- Phoenix Contact
- Rennsteig Tools
- Rennsteig Tools Aviation Tools
- Sargent Crimp Tools
- Thomas & Betts Crimping Tools
- Design Metal Connections aka DMC Permaswage Deutsch Tool Kits Tooling
- Enerpac
- Fatigue Technology Inc
- Gedore Quality Tools for all Industries
- General Hand Tools
- Heat Guns and Raychem Heating Tools
- Heat Shrink Heat Shrinkable Boots
- Install Insertion Removal Tools Connector Contacts
- LOKRING CORP SWAGING TOOLS
- Mil Spec MIL Electrical Connectors
- Positioners and Locators
- Parker Hannifin Corp
- Relay's
- Rivet Guns
- Strippers and Cutters, Cable, Wire, Coax, Fiber Optics
- Switches
- Test Equipment
- Turret Heads
- Wire Harness Tooling
Pico Corporation Crimp Tools There are 8 products.
-
$1,080.00400-B-1 Pneumatic Crimp Tool Mfg: Pico Corporation Condition: Factory New
The 400-B-1 is for Commercial, Aerospace and Military Applications, it can crimp insulated terminals 26-24 to 2/0 AWG, unisulated terminals 26-3/0 AWG, contacts pins and sockets 28 to 4/0AWG. With a full cycle design that will insure a perfect crimp on every contact that meets tolerance requirements. Manufacturer: Pico Corporation Condition: Factory New
$1,080.00In Stock For same Day Shipping -
$1,298.00400-B-1EC Pneumatic Crimper w/ EC Unit Mfg: Pico Condition: Factory New
The 400-B-1EC is for Commercial, Aerospace and Military Applications, it can crimp insulated terminals 26-24 to 2/0 AWG, unisulated terminals 26-3/0 AWG, contacts pins and sockets 28 to 4/0AWG. With a full cycle design that will insure a perfect crimp on every contact that meets tolerance requirements. Manufacturer: Pico Corporation Condition: Factory New
$1,298.00Note: There is a lead-time if you place an order for this product. Call or Email for current lead-time. -
$1,178.00400-BEC Pneumatic Crimp Tool Mfg: Pico Corporation Condition: Factory New
The 400-BEC is for Commercial, Aerospace and Military Applications, it can crimp terminals 26 to 2/0 AWG and contacts 26 to 4/0AWG, this unit comes with the electronically controlled foot switch. Manufacturer: Pico Corporation Condition: Factory New
$1,178.00Out of stock -
$965.00400-BHD Pneumatic Crimper Mfg: Pico Condition: Factory New
The 400BHD is for Commercial, Aerospace and Military Applications, it can crimp insulated terminals 26-24 to1/0 AWG, unisulated terminals 26-2/0 AWG, contacts pins and sockets 28 to 2/0AWG. With a full cycle design that will insure a perfect crimp on every contact that meets
$965.00Note: There is a lead-time if you place an order for this product. Call or Email for current lead-time. -
$750.00400-BHD Pneumatic Crimper Mfg: Pico Condition: Used
The 400BHD is for Commercial, Aerospace, and Military Applications, it can crimp insulated terminals 26-24 to1/0 AWG, uninsulated terminals 26-2/0 AWG, contacts pins and sockets 28 to 2/0AWG. With a full cycle design that will ensure a perfect crimp on every contact that meets
$750.00Out of stock -
$1,178.00400-BHD-EC Pneumatic Crimper w/ EC Unit Mfg: Pico Condition: Factory New
The 400-BHD-EC is for Commercial, Aerospace and Military Applications, it can crimp insulated terminals 26-24 to1/0 AWG, unisulated terminals 26-2/0 AWG, contacts pins and sockets 28 to 2/0AWG. With a full cycle design that will insure a perfect crimp on every contact that meets tolerance requirements. Manufacturer: Pico Corporation Condition: Factory New
$1,178.00Note: There is a lead-time if you place an order for this product. Call or Email for current lead-time. -
$1,930.00500-D-1 Pneumatic Crimp Tool Mfg: Pico Condition: New
This pneumatic crimp tool manufactured by Pico Croporation and will crimp pins and sockets 20 - 4/0 AWG, solderless terminals insulated 22 - 3/0 AWG, uninsulated 26-24 - 4/0 AWG. Coaxial Applications- max dia. 1.5(3.8 cm). Features an added booster for more power with the D-1 model. Manufacturer: Pico Corporation Condition: New
$1,930.00Note: There is a lead-time if you place an order for this product. Call or Email for current lead-time. -
$1,940.00500-DEC Crimp Tool Mfg: Pico Corp. Condition: Factory New
Pneumatic crimp tool manufactured by Pico Croporation is equip with the EC kit, which replaces the internal valve system, decreasing cycle time(2.5 sec) over stock configuration(7-8 sec). Resulting in increased production rates. This tool will crimp pins and sockets Manufacture: Pico Corporation Condition: Factory New
$1,940.00Note: There is a lead-time if you place an order for this product. Call or Email for current lead-time.
