8728 0000 6 Archives - Crimptools https://www.store.crimptools.com/mfgpartnumber/872800006/ Thu, 21 Apr 2022 19:57:52 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.store.crimptools.com/wp-content/uploads/2021/09/logo-100x100.jpg 8728 0000 6 Archives - Crimptools https://www.store.crimptools.com/mfgpartnumber/872800006/ 32 32 8728 0000 6 Crimp Tool Mfg: Rennsteig Condition: Factory New https://www.store.crimptools.com/product/8728-0000-6-crimp-tool-m225207-01-mfg-rennsteig-condition-factory-new/ Thu, 19 Sep 2013 13:56:01 +0000 https://www.store.crimptools.com/product/8728-0000-6-crimp-tool-m225207-01-mfg-rennsteig-condition-factory-new/ Rennsteig hand tool for turned male pins and female socket contacts 28-16 Awg and 0,08 – 1,3 mm2

Does not include locators/positioners.

Mfg: Rennsteig

Condition: Factory New

When stock is not available the current lead time is 6-9 weeks

The post 8728 0000 6 Crimp Tool Mfg: Rennsteig Condition: Factory New appeared first on Crimptools.

]]> The crimp is a 4/8 indent crimper

  • Special hand tool for crimping turned male pins and female socket contacts Indenter manufactured in accordance to Mil M22520/7-01,
    Relevant crimp depth set by an 8-position selector, selector position readable on both sides
    Selector settings according to MIL
    Single locators and multi-pin locators are available
    Existing turrets fit the tool
    Go- No- Go gauge for accurate calibration according to MIL22520/3-03 standard available.
    Forced locking system and synchronous drive of indenters for highly reliable crimp connections
    Optimized opening width, ergonomic design, and reduced hand force
    Approval for aviation after successful qualification through Airbus SAS

This tool is for use on wire gauges 0.08 – 1.3 mm2 or 28 – 16 AWG.

This tool will accept all locators/positioners manufactured by Daniels Manufacturing and Astro also.

Your tool will come with calibration paperwork from the factory and their Certificate of Compliance.

This tool does not come with locators/positioners

Mfg. Rennsteig

Condition: Factory New

When stock is not available the current lead time is 6-9 weeks

The post 8728 0000 6 Crimp Tool Mfg: Rennsteig Condition: Factory New appeared first on Crimptools.

]]>