Berg Dupont Crimp Tools

64001-4700 Crimp Tool Mfg: Molex Condition: New Surplus

Dakota Electronics — Mon, 15 Sep 2025 19:28:55 +0000

Molex 64001-4700 RHT-2761-CC hand crimping tool.

InsulKrimp Male and Female Fully Insulated Quick Disconnect Couplers, Perma-Seal.

Quick Disconnect Couplers and Snap Plug Receptacles 14 – 22 AWG, Conductor Crimp only.

Replaces 19285-0033

Mfg: Molex

Condition: New Surplus

The post 64001-4700 Crimp Tool Mfg: Molex Condition: New Surplus appeared first on Crimptools.

AM60145 Crimp Tool Mfg.: Molex Condition: New Surplus

Dakota Electronics — Mon, 15 Sep 2025 17:43:49 +0000

This hand tool will terminate discrete wire into Molex connectors using Insulation Displacement Technology (I.D.T.).

A maximum of 4 wires can be inserted into the Molex 7660 connector on .156 spacing

The AM 6015 hand tool is primarily intended for use with the Molex 7660 harness board style connector

Mfg.; Molex

Condition: New Surplus

The post AM60145 Crimp Tool Mfg.: Molex Condition: New Surplus appeared first on Crimptools.

WT611TB Crimp Tool Mfg: TnB Condition: New Surplus

Dakota Electronics — Thu, 14 Aug 2025 20:11:30 +0000

WT611TB, WALTHER CRIMPING TOOL

Wire gauge .014 – 2.5 MM²

Only for Drilled Pins

Mfg: Thomas and Betts, now ABB Installation Products

The post WT611TB Crimp Tool Mfg: TnB Condition: New Surplus appeared first on Crimptools.

63823-3770 63816-0050 Crimp Tool Mfg.: Molex Condition: Used

Dakota Electronics — Thu, 14 Aug 2025 18:33:09 +0000

63823-3770 63816-0050 Hand Crimp Tool for ISO (M3) Receptacle Terminals

Mfg.: Molex

Condition: Used

The post 63823-3770 63816-0050 Crimp Tool Mfg.: Molex Condition: Used appeared first on Crimptools.

Y1535 Crimp Die Mfg: Daniels Condition: Used

Dakota Electronics — Tue, 15 Apr 2025 14:39:45 +0000

This hex die set is for crimping connectors to coax cable and is to be used in the Daniels HX4 or any tool that meets the Mil number M22520/5-01.
Manufacturer: Daniels DMC
Condition: Used

The post Y1535 Crimp Die Mfg: Daniels Condition: Used appeared first on Crimptools.

RSK101 Ground Connector Mfg. ABB Condition New Surplus

Dakota Electronics — Tue, 24 Sep 2024 20:20:42 +0000

100 pieces RSK101

One piece Ground Connector 1.27-2.28 MM

Mfg. ABB Installation Products

Condition New Surplus

The post RSK101 Ground Connector Mfg. ABB Condition New Surplus appeared first on Crimptools.

90052 Crimp Tool Mfg. TE/AMP Cond. Used

Noble Landry — Wed, 21 Aug 2024 14:53:12 +0000

Full ratchet crimp tool for use with, 2-22, 1-22, and 1-30 is how the tool is marked

Mfg. TE/AMP

Cond. Used

The post 90052 Crimp Tool Mfg. TE/AMP Cond. Used appeared first on Crimptools.

90189-1 Crimp Tool Mfg. TE Connectivity AMP Condition: Used

Noble Landry — Wed, 10 Jul 2024 18:17:32 +0000

The controlled ratchet cycle hand crimp tool is designed to crimp 20-18AWG Type F

Mfg. TE Connectivity AMP

Condition: Used

The post 90189-1 Crimp Tool Mfg. TE Connectivity AMP Condition: Used appeared first on Crimptools.

21608 Crimp Die Mfg: T&B Condition: New Surplus

Noble Landry — Tue, 04 Jun 2024 20:26:51 +0000

This die is missing the locator.

This crimp die is designed to crimp 6 AWG. This die will work in the following Hydraulic Crimping Heads, 13642M, 13642, 13400, or any tooling made to the Mil-Spec MS25441-1. This die can also be used in other manufacturers tooling such as Hydraulic Hand Tool HH80C and Hydraulic Crimping Head TBHD1 by Daniels. Or if the tooling will accept MS90485-XX, MS23002-XX, and MS25442-XX then this die will work in that tooling.

Mfg: Thomas and Betts

Condition: New Surplus

The post 21608 Crimp Die Mfg: T&B Condition: New Surplus appeared first on Crimptools.

12-8 Terminal 100PCS Mfg. 3M Condition: New Surplus

Noble Landry — Thu, 28 Mar 2024 18:36:15 +0000

Ring Terminal Connector 8 Stud Circular 14-16 AWG Crimp

Mfg. 3M

Condition: New Surplus

The post 12-8 Terminal 100PCS Mfg. 3M Condition: New Surplus appeared first on Crimptools.